Numerical investigation and heat transfer performance evaluation of conical turbulators in circular tubes


Şafak İ., Güneş S., Ülkü M.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, cilt.233, sa.2, ss.1-16, 2027 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 233 Sayı: 2
  • Basım Tarihi: 2027
  • Doi Numarası: 10.1016/j.ijthermalsci.2026.111489
  • Dergi Adı: INTERNATIONAL JOURNAL OF THERMAL SCIENCES
  • Derginin Tarandığı İndeksler: Academic Search Ultimate (EBSCO), Engineering Source (EBSCO), Scopus, Science Citation Index Expanded (SCI-EXPANDED), Compendex, INSPEC
  • Sayfa Sayıları: ss.1-16
  • Kayseri Üniversitesi Adresli: Evet

Özet

This study evaluated the thermo-hydraulic performance of 45 distinct conical turbulator configurations, positioned with a wall clearance inside a circular tube subjected to a constant heat flux of 2500W/m2. The effects on heat transfer and pressure drop were investigated across a Reynolds number (Re) range of 3080 to 23620.
To ensure methodological consistency with the established literature, the Gnielinski and Petukhov correlations were used to validate the smooth-tube Nusselt number (Nu) and friction factor (f), respectively. This validation confirmed the predictive accuracy and suitability of the standard k−ω turbulence model. Furthermore, a comprehensive mesh independence study was performed to determine the optimal grid resolution for the numerical domain. The conical turbulators were systematically tested at five distinct twist angles (0°,90°,180°,270°, and 360°). The 45 configurations were defined by combining varying pitch ratios (P/D=1,2, and 4) and flow arrangements (Convergent, Divergent, and Convergent-Divergent).
The results indicated that the maximum heat transfer enhancement was achieved at a Reynolds number of Re=3080 with the D1_360 configuration (Divergent, P/D=1, twist angle = 360°), resulting in a 3.13-fold increase over the smooth tube. The highest pressure drop was also observed in the D1_360 configuration at Re=23620, showing a 19-fold increase. Furthermore, the maximum overall improvement in the Thermal Performance Factor (TPF) was achieved with the C1_0 configuration (Convergent, P/D=1, twist angle = 0°), yielding a 1.45-fold increase.