Fabrication of carbon fibers from the cupric ion impregnated and thermally stabilized poly(hexamethylene adipamide) precursor


Erzurumluoglu L., Rahman M. M., Demirel T., KARACAN İ.

Journal of Industrial Textiles, vol.51, no.3_suppl, 2022 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 51 Issue: 3_suppl
  • Publication Date: 2022
  • Doi Number: 10.1177/15280837211056984
  • Journal Name: Journal of Industrial Textiles
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Business Source Elite, Business Source Premier, Compendex
  • Keywords: Polyamide 66, stabilization, carbonization, mechanical properties, X-Ray diffraction, FT-IR, PERFORMANCE ACOUSTIC MATERIALS, POLYACRYLONITRILE FIBERS, MECHANICAL-PROPERTIES, TENSILE PROPERTIES, POLYAMIDE 6, PAN FIBERS, ADSORPTION, CONDUCTIVITY, CELLULOSE, CARBONIZATION
  • Kayseri University Affiliated: No

Abstract

© The Author(s) 2021.The conversion of poly (hexamethylene adipamide) or polyamide 66 precursor fiber to carbon fibers was accomplished through thermal stabilization and carbonization processes. Thermal stabilization was conducted of cupric chloride (CuCl2)–ethanol-impregnated polyamide 66 (PA66) fibers in the air. To determine the influence of heating rate on the fiber structure and properties of the resultant carbon fibers, carbonization experiments were performed at selected temperatures of 500, 700, 900, and 1100°C using 2.5 and 5 °C/min heating rates with no dwelling. The results conclusively revealed that the volume density and tensile properties of the PA66 fiber were higher at 2.5 °C/min heating rate. After fixing the heating rate as 2.5°C/min, further carbonization experiments were conducted at temperatures from 500 to 1100°C, using increments of 100°C with no dwelling time. Linear density, volume density, fiber diameter, carbon yield, elemental composition, tensile, and electrical properties exhibited a strong dependence on the carbonization temperature. After taking into account the effects of structural defects (i.e., microvoids), tensile strength, and tensile modulus of the carbon fibers increased to 794 MPa and 92.4 GPa, respectively, when carbonized at 1100°C. X-ray diffraction analysis of the carbon fibers further revealed the existence of a greatly disordered (i.e., amorphous) structure, which developed during the carbonization process. FT-IR analysis confirmed the formation of highly aromatic carbon clusters at temperatures of 500°C and higher. The outcomes of electrical conductivity in this study confirm that the PA66 precursor was converted into a semi-conducting state once it was carbonized.